Did you ever really have to jump start your car only to notice that the battery was mired in gunk? If you were wondering what the gunk was, it was battery decay, formed by acid condensation. It may be cleaned using a simple chemical solution, since it has been formed by an acid. Something as simple as baking soda might effortlessly clean the battery acid. You need to take some safeguards, but safe cleaning of your battery is only following a few instructions.
Basic Car Battery Cleaning
First off, you’ll need the tools which you can get easily at home. You basically need safety glasses for the eyes, baking soda, adjustable pliers and screwdrivers with insulated handles and a stiff-bristled brush. Other items you need requires a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. A few sponges or maybe clean cloths, a spray bottle with all-purpose household cleaner, some rubber gloves and a large pail of clean water. It might appear like a lot of stuff to clean the device, but it will keep it safe and non-hazardous.
A lot of the corrosive by-products possess sulfuric acid, so it is a wise idea to use the safety glasses to protect your eyes, and the rubber gloves for your hands. Take care never to get the deposits on the car since it could damage the car’s paint job. Contingent on how corroded the battery might be, the amount of cleaning that is needed may vary. To be able to completely remove the dirt and corrosion, you will need to take the battery out of the vehicle. First use the plastic or metal scraper to get off whatever dirt it is possible to, and also use the bristle brush.
What To Do Next
Next step is to mix one tablespoon of baking soda with a pint of water and add the solution to the battery and the cable connection using the funnel or turkey baster. Work the mixture of baking soda into the heavily corroded places with the brush, and disconnect the battery cables from the terminals for easier cleaning. You can take off the cables, starting with negative first then positive, using the pliers and wrenches. Brush away much of the oxidation from the terminals and all of the parts, and then flush each one with the baking soda solution.
If perhaps you can still find some dirt and grease left over, use the spray household cleaner and sponge to get rid of them. Next, dry out all the pieces with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. Finally, as soon as everything is secured and accurately pulled together, you will now have a safe and clean battery.